Brick and black clad house set into a bush block
Floor heating · Brisbane

Electric floor heating Brisbane

Under-tile heating for Brisbane bathrooms and in-slab heating for new homes, supplied and installed across South East Queensland. ELEKTRA cable with a 20-year warranty.

Since 1988Floor heating specialists
ELEKTRAExclusive Australian importer
20 yearsCable warranty
24 hoursFree layout from your plans
Australia-wideSupply only, or supply and install
Brisbane

Warm days, cold tiles in the morning.

Brisbane winters are short and dry, but early mornings from June to August are cool, and tiled floors hold that cold well into the day. Most Brisbane enquiries are for bathrooms and ensuites, where bare feet meet tile first thing.

Floor heating in a subtropical climate is about comfort when you want it. Each room runs on its own thermostat, so the bathroom can warm up for an hour each morning and then switch off.

P.A.P. Heating Solutions has supplied floor heating since 1988 and is the exclusive Australian importer of ELEKTRA heating cable. We supply and install across Brisbane and South East Queensland.

Bathrooms and ensuitesDM20 under tile
New homes on slabVCD35 in slab
QueenslandersUnder tile on a sheeted subfloor
CoverageBrisbane, Gold Coast, Sunshine Coast, Toowoomba
Wet room shower with a heated tiled floor
The systems

Matched to how Brisbane homes are built.

Raised timber homes, slab homes and apartments each suit a different approach. The layout shows the right one for each room.

Bathroom with a freestanding bath on a heated herringbone floor
DM20 · Under tile

Under-tile heating

ELEKTRA DM20 sits in the tile adhesive bed, 20 W per lineal metre. It suits bathroom renovations on slab or on a sheeted and waterproofed timber floor.

Under-tile heating
ELEKTRA VCD35 heating cable on a slab base before the concrete pour
VCD35 · In slab

In-slab heating

ELEKTRA VCD35 is tied to the reo before the pour. It suits new homes and extensions on slab, especially living areas with large tiled floors.

In-slab heating
How it works

From plans to a warm floor.

Send your plans

Upload plans or sketch the rooms with sizes. A rough hand drawing is fine for a single bathroom.

Free layout

Within 24 hours you get a cable layout, the load requirements for your electrician and a list of parts.

Supply or install

We supply the cable, thermostats and parts, or we install it for you. A licensed electrician makes the final connection.

Commissioning

The cable is tested before and after the floor goes down. You set each room on its own thermostat.

Brisbane homes

What we see in Brisbane.

Queenslanders and raised homes

Timber floors on stumps lose heat underneath. Bathrooms are sheeted and waterproofed, then the cable goes under the tiles. Insulation under the floor helps if you can get to it.

Slab homes

Newer homes on slab across the north, the south and the Redlands often have tiled living areas. Under-tile cable suits a retile; in-slab suits a new build.

Apartments

Under-tile heating suits apartment bathrooms. Check body corporate rules and acoustic requirements before work starts.

Where we work

Brisbane and South East Queensland.

Inner BrisbaneNorthsideSouthsideWestern SuburbsBaysideRedlandsMoreton BayLoganIpswichGold CoastSunshine CoastNoosaToowoombaScenic Rim

We supply and install Australia-wide. Supply only is available for your own tiler and electrician.

Questions

Floor heating in Brisbane, answered.

Is floor heating worth it in Brisbane?

In bathrooms and ensuites, yes for most people. Brisbane mornings in winter are cool and tiles stay cold. A heated floor on a timer warms the room before you get up.

Can I heat a bathroom in a Queenslander?

Yes. The timber floor is sheeted and waterproofed first, then the cable goes under the tiles as normal. The layout notes what the subfloor needs.

Do you install in Brisbane?

Yes. We supply and install across Brisbane and South East Queensland, or supply cable and parts to your own trades.

Will it heat the house in summer?

No. Each room has its own thermostat and timer, so the heating only runs when you set it to. In summer it stays off.

How long does a layout take?

Send your plans and you will receive the layout, load requirements and parts list within 24 hours, at no cost.

Do I need an electrician?

Yes. A licensed electrician makes the final connection. We give them the load requirements with the layout.

Get a layout

Send your plans. Free layout within 24 hours.

Brisbane plans can be emailed to us. We provide the layout design and load requirements at no cost. Email info@papheatingsolutions.com.au or call (02) 6242 9310.