Tools

Floor heating calculator

Two quick tools. Find the system that suits your floor, then estimate what it costs to run.

Dark green marble bathroom with a heated stone floor and touch screen thermostat
Step 1 · System picker

What are you heating?

Recommended system

Pick an option

Choose what you are heating and the system that suits it will appear here.

Step 2 · Running cost

Estimate the running cost.

For under-tile and in-screed heating. Enter the heated floor area, not the whole room. Cable is not laid under baths, vanities or fixed joinery.

Estimate at full output
$0.49per day
$15per 30 days
$58per heating season
0.6 kWconnected load

Based on ELEKTRA DM20 cable, 20 W per lineal metre, at 100 mm spacing.

This is an upper figure. The thermostat switches the cable off once the floor is warm, so actual use is lower. It is a guide only and not a quote.

Heating a slab?

In-slab heating works differently. The slab is warmed overnight, often on an off-peak rate, and releases the heat through the day, so the cable is not on for the whole period. Our running cost guide has typical figures for in-slab systems.

Read the running cost guide
Questions

About the estimate.

How is the running cost worked out?

Connected load in kilowatts, multiplied by the hours the floor runs each day, multiplied by your electricity rate per kilowatt hour. The load is based on ELEKTRA DM20 cable at 100 mm spacing over the heated area you enter.

Why is my real bill lower than the estimate?

The estimate assumes the cable is on for every hour you enter. In use, the thermostat switches the cable off once the floor reaches temperature, so the cable runs for only part of that time.

What electricity rate should I use?

Use the rate on your bill. The calculator starts at 27 cents per kilowatt hour, and you can change it to match your tariff.

Can you size the system for me?

Yes. Send your plans and we will draw the cable layout and load requirements for your electrician within 24 hours, at no cost.

Get a layout

Send your plans. Free layout within 24 hours.

Email info@papheatingsolutions.com.au or call (02) 6242 9310. We provide the layout design and load requirements at no cost.