White kitchen with a timber island and a polished concrete floor
Floor heating · Perth

Electric floor heating Perth

Under-tile and in-slab heating for Perth homes, supplied and installed across Perth and regional Western Australia. ELEKTRA cable with a 20-year warranty.

Since 1988Floor heating specialists
ELEKTRAExclusive Australian importer
20 yearsCable warranty
24 hoursFree layout from your plans
Australia-wideSupply only, or supply and install
Perth

Tiled floors and cool winter mornings.

Perth homes are mostly double brick on slab, with tile or polished concrete through the living areas. Those floors are welcome in summer and cold from June to August, especially first thing in the morning.

Floor heating warms the floor directly, room by room, with each room on its own thermostat and timer. It runs when you want it, in the rooms you use, and stays off the rest of the year.

P.A.P. Heating Solutions has supplied floor heating since 1988 and is the exclusive Australian importer of ELEKTRA heating cable. We supply and install across Perth and regional WA.

Bathroom renovationsDM20 under tile
New builds on slabVCD35 in slab
Retiled living areasDM20 under tile
CoveragePerth metro, Peel, South West
Black clad house on a coastal block
The systems

Two systems for Perth homes.

Retiles and renovations go under the tiles. New homes can have the cable cast into the slab. The layout shows the right system for each room.

Tiled bathroom with a freestanding bath and a heated floor
DM20 · Under tile

Under-tile heating

ELEKTRA DM20 sits in the tile adhesive bed, 20 W per lineal metre. It suits bathroom renovations and retiled living areas on the existing slab.

Under-tile heating
Heating cable on reinforcing mesh before a slab pour
VCD35 · In slab

In-slab heating

ELEKTRA VCD35 is tied to the reo before the pour. It suits new homes and extensions, and pairs well with rooftop solar, which can run the heating during the day.

In-slab heating
How it works

From plans to a warm floor.

Send your plans

Upload plans or sketch the rooms with sizes. A rough hand drawing is fine for a single bathroom.

Free layout

Within 24 hours you get a cable layout, the load requirements for your electrician and a list of parts.

Supply or install

We supply the cable, thermostats and parts, or we install it for you. A licensed electrician makes the final connection.

Commissioning

The cable is tested before and after the floor goes down. You set each room on its own thermostat.

Perth homes

What we see in Perth.

Double brick on slab

The most common Perth home. Under-tile cable goes straight onto the slab when a bathroom or living area is retiled.

New builds

Project and custom homes on slab can have in-slab heating in the living areas. It has to be planned before the slab is poured.

Polished concrete

Common in newer Perth homes and extensions. Cable in the slab heats it evenly. On an existing slab, an in-screed system can go under a new topping.

Where we work

Perth and regional Western Australia.

Western SuburbsNorthern SuburbsSouthern SuburbsEastern SuburbsFremantleJoondalupRockinghamMandurahPerth HillsSwan ValleyBunburyBusseltonMargaret RiverAlbany

We supply and install Australia-wide. Supply only is available for your own tiler and electrician.

Questions

Floor heating in Perth, answered.

Do you install floor heating in Perth?

Yes. We supply and install across Perth and regional WA, or supply cable and parts to your own trades. The layout is free either way.

Is floor heating worth it in Perth?

For tiled bathrooms and living areas, many people find it is. Perth winter mornings are cool and tiled floors stay cold. Each room runs on its own timer, so it only heats when you want it.

Can I add it to my existing tiled floor?

Under-tile cable goes in when the floor is retiled. If you are not retiling, talk to us about the options for that room.

Does it work with solar?

Yes. Heating can be timed to run during the day when your panels are generating, and in-slab heating stores that warmth for the evening.

How long does a layout take?

Send your plans and you will receive the layout, load requirements and parts list within 24 hours, at no cost.

Do I need an electrician?

Yes. A licensed electrician makes the final connection. We give them the load requirements with the layout.

Get a layout

Send your plans. Free layout within 24 hours.

Perth plans can be emailed to us. We provide the layout design and load requirements at no cost. Email info@papheatingsolutions.com.au or call (02) 6242 9310.